How to Resolve Automatic Repair Loop in Windows 11

[lwptoc hideItems=”1″ width=”full”]

Comprehensive Guide: Resolving Preparing Automatic Repair Loop in Windows 11

Windows 11 is the latest operating system released by Microsoft, packed with exciting new features and a redesigned interface. However, like any software, it can encounter issues that may disrupt the smooth functioning of your computer. One such problem that Windows 11 users may encounter is the automatic repair loop. This frustrating issue occurs when your computer repeatedly attempts to enter the automatic repair mode but fails to do so successfully.

Fortunately, there are several steps you can take to fix the automatic repair loop in Windows 11 computers. In this article, we will guide you through the troubleshooting process, offering solutions to help you resolve this frustrating issue and get your computer back up and running smoothly.

What Is an Automatic Repair Loop in Windows Computers

An Automatic Repair Loop refers to a situation where a Windows computer continuously restarts and enters the Automatic Repair mode without being able to start up properly. This loop can occur for various reasons, such as corrupted system files, hardware conflicts, improper shutdowns, incorrect boot settings, or faulty hardware, especially Bad SSD or RAM.
When a computer enters the Automatic Repair mode, it tries to diagnose and fix any issues preventing the system from booting. However, suppose the repair process fails or is unable to resolve the underlying problem. In that case, the system restarts and again enters the Automatic Repair mode, creating the Windows auto-repair loop.
The Automatic Repair Loop can be frustrating for users as it prevents them from accessing and using their computers typically. To resolve this issue, users may need to try different troubleshooting steps, such as booting into Safe Mode, repairing startup settings, using system recovery tools, or performing a clean installation of Windows.

How to Recover Data from Computer Stuck at Automatic Repair?

If your computer is stuck at the automatic repair screen, there are a few steps you can try to recover your data:

1. Restart your computer:

A simple restart can sometimes resolve the issue. Press the power button to turn off your computer and then turn it on again. If it goes back to the automatic repair screen, proceed to the next steps.

2. Use a recovery drive or Windows installation media USB:

If you have a recovery drive or a Windows installation media (such as a USB or DVD), insert it into your computer and boot from it. From the recovery options, select “Troubleshoot” and then “Advanced options.” Next, choose “Command Prompt.” In the command prompt, you can access your files and copy them to an external device using commands like “copy” or “xcopy.”

4. Remove the hard drive and connect it to another computer:

If you’re comfortable removing hardware, you can remove the hard drive from the stuck computer and connect it to another computer using a USB hard drive adapter or an external enclosure. From the second computer, you should be able to access your files on the stuck hard drive and copy them.

5. Seek professional help:

If the above steps do not work or if you are not comfortable performing them, it may be necessary to seek professional help from a data recovery service. We have specialised tools and expertise to recover data from computers stuck at automatic repair. Remember to prioritise data recovery and make backups in the future to prevent such situations.

What causes the Automatic Repair loop?

The causes underlying this exasperating issue can vary. Within this section, we delve into some of the most common culprits behind the Preparing Automatic Repair loop issue on Windows 11:

1. Registry Editor: Wrong and Missing Keys
Some users encounter this issue due to errors in the Windows Registry. Missing or incorrectly configured keys can disrupt the boot process and lead to the perpetual repair loop.

2. System Files: Missing or Damaged
Corrupted or absent system files can impede the proper functioning of Windows 11, prompting the Preparing Automatic Repair loop.

3. Malware Infections
Malicious software infiltrating your system can tamper with crucial system files, potentially resulting in a troublesome loop.

4. Graphic Driver Problems
Faulty or incompatible graphic drivers might lead to this issue. Conflicts between these drivers and the operating system can trigger the loop.

5. Peripheral Device Issues
Hardware or software conflicts arising from faulty peripheral devices – such as mice, keyboards, or webcams – can contribute to the Preparing Automatic Repair loop.

Overcoming the Preparing Automatic Repair Loop: Effective Solutions

The following section outlines comprehensive solutions to resolve the Preparing Automatic Repair loop on your Windows 11 PC. By following these step-by-step instructions, you can free your system from the clutches of this frustrating issue.

1. Disconnect Peripheral Devices

Often, the culprit behind the loop can be a faulty peripheral device. To identify the problem device, meticulously unplug each peripheral – mouse, keyboard, webcam, etc. – and observe if the loop persists. If the loop halts after disconnecting a specific device, it’s time to replace or repair that peripheral.

2. Hard Reboot Your PC

A hard reboot can sometimes swiftly resolve the Preparing Automatic Repair issue. Press and hold the Power button on your PC for around 20 seconds. Wait for the system to shut down completely, then unplug the power cable for a minute or two. Reconnect and power up your system to check if the problem is resolved.

3. Reset your Computer RAMS

One of the leading causes of BSOD and Windows Repair issues is faulty RAM. To troubleshoot potential problems with your computer, you can locate the RAM and remove one stick at a time. Then, try turning on your laptop to see if the error message still appears. If it does, try removing the other stick of RAM to see if that resolves the issue.

4. Remove Problematic Files

Corrupted boot files can lead to the Preparing Automatic Repair loop. Boot into Windows Recovery Environment (WinRE) and execute the following steps:
1. Hard reboot your PC multiple times to enter WinRE.
2. Navigate to Troubleshoot > Advanced options.
3. Choose Command Prompt and execute the provided commands to remove problematic files.
4. Restart your PC and verify if the issue persists.

5. Disable the Automatic Repair Tool

Disabling the Automatic Repair tool can stop the loop, albeit at the cost of future repair functionality. Execute these steps carefully:
1. Enter WinRE by hard resetting your PC.
2. Navigate to Troubleshoot > Advanced options.
3. Open Command Prompt and input commands to disable Automatic Repair.
4. Restart your PC and monitor if the loop persists.

6. Deactivate Early Launch Anti-Malware Protection

Early Launch Anti-Malware (ELAM) can sometimes misinterpret essential boot drivers as malicious, causing the loop. To disable ELAM, follow these steps:
1. Enter Troubleshoot > Advanced options in WinRE.
2. Select Startup Settings and disable ELAM.
3. Restart your PC and observe if the loop recurs.

7. Rebuild Boot Configuration Data and Run CHKDSK

A corrupted Boot Configuration Data (BCD) or problematic drive errors can trigger the loop. Execute the following steps to address this:
1. Navigate to Troubleshoot > Advanced options in WinRE.
2. Open Command Prompt and input commands to rebuild BCD and run CHKDSK.
3. Restart your PC and verify if the issue is resolved.

8. Scan System Files in Safe Mode

Running DISM and SFC scans can help rectify the issue. Execute the following steps in Safe Mode:
1. Enter Troubleshoot > Advanced options in WinRE.
2. Use the Command Prompt to execute DISM and SFC scans.
3. Restart your PC and monitor for improvements.

9. Boot PC Into Safe Mode

Entering Safe Mode can isolate third-party apps as the potential cause of the loop:
1. Navigate to Troubleshoot > Advanced options in WinRE.
2. Choose Startup Settings and enable Safe Mode.
3. Observe your PC’s performance in Safe Mode.

10. Reinstall Your Graphic Driver

Incompatible or buggy graphic drivers can contribute to the issue. Reinstall the driver in Safe Mode by following these steps:
1. Open Device Manager by pressing Windows + R and typing `devmgmt.msc`.
2. Uninstall your graphic driver and scan for hardware changes.
3. Verify if the driver is successfully reinstalled.

11. Roll Back the Graphic Driver

If the loop started after a driver update, rolling back to the previous version may help:
1. Access Device Manager and roll back the graphic driver.

12. Restore Your PC Using System Image Recovery

If the issue emerged after a third-party program or Windows update, restoring your system might help:
1. Enter Troubleshoot > System Image Recovery in WinRE.
2. Restore your PC to its previous state.

13. Reset Your Windows Device

As a last resort, consider resetting your PC. This will revert your system to default settings, potentially resolving the loop:
1. Access Troubleshoot > Reset this PC in WinRE.
2. Choose the option to remove everything and follow the prompts.

How to Recover Data from Computer Stuck at Automatic Repair?

If your computer is stuck at the automatic repair screen and none of the methods above are working, try these steps to recover your data:

1. Use a recovery drive or Windows installation media USB:

2. Remove the hard drive and connect it to another computer:

3. Seek professional help:

If the above steps do not work or if you are not comfortable performing them, it may be necessary to seek professional help from a data recovery service. They have specialised tools and expertise to recover data from computers stuck at automatic repair.
Remember to prioritise data recovery and make backups in the future to prevent such situations.

Frequently Asked Questions (FAQs)

How Long Does Windows Automatic Repair Take on Gaming Computers?

When encountering the “preparing automatic repair” issue on Gaming Computers. it’s normal for users to feel anxious and unsure how long they should wait. Although this process has no set timeframe, it usually takes anywhere from a few minutes to an hour. The duration can differ depending on the particular problem that Windows is facing.

How to Avoid Automatic Repair Loop in Windows 11?

Yes, you can take preventive measures to ensure the smooth functioning of your system. Here are some suggestions:

Regularly update your system: Keeping your operating system and software up to date is crucial for security and performance improvements.
Check for malware: Use reliable antivirus software to scan your system regularly and remove any malicious programs that may harm your computer.
Manage disk space efficiently: Regularly clean up unnecessary files and folders, and consider using disk cleanup tools to optimise your storage.
Use Free SSD/HDD health checking software: Monitor the health of your SSD using reliable software to detect any potential issues and take appropriate action.
Avoid force shutdowns: It’s always better to let Windows 11 shut down naturally to avoid data corruption or system instability.
Use system protection: Enable system protection to create restore points that can help you recover your system in case of any issues or errors.By following these preventive measures, you can ensure your system’s smooth operation and longevity.

What Other Issues Can Arise From an Unsuccessful Automatic Repair Loop?

If your automatic repair loop fix doesn’t work, you might face system instability, frequent crashes, or even data loss. It’s essential to back up your files and consider our professional help if problems persist.